Analog Output Units; Specifications - Omron PRT1-COM Operation Manual

Analog Output Units

7-2

Analog Output Units

7-2-1 Specifications

GT1-DA04 (Available Soon)
120
General Specifications
Item
I/O connections
Number of outputs
Internal Voltage range
power
Current con-
supply
sumption in Unit
(inrush current)
Current consumption
(I/O Unit interface)
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Operating atmosphere
Storage temperature
Safety standards
EMC directives
Mounting
Mounting strength
Terminal strength
Connector lock strength
Weight
Characteristics
Item
Output signal range 0 to 5 V, 1 to 5 V, 0 to 10 V,
or --10 to 10 V
Allowable external out- 5 KΩ min.
put load resistance
External output imped- 0.5 Ω max.
ance
Resolution 1/6000 (full scale)
Accuracy y
25_C ±0.4% FS
--10_C to ±0.8% FS
55_C
Conversion time 4 ms/4 points
Converted output data Binary
(Binary)
--10- to 10-V range:
Other signal ranges:
Dielectric strength 500 VAC; detected current 1 mA (between communica-
tions section and analog output, and between internal
power supply and analog output)
Isolation method Photocoupler insulation (between communications part
and analog output)
(no insulation between analog outputs)
Specification
Terminal block (M3)
4 outputs (allocated four words in the Master Unit)
20.4 to 26.4 VDC (24 VDC
100 mA max.
(inrush current 30 A max.)
50 mA max.
1,500 V p-p Pulse width: 0.1 to 1 µs
Startup pulse: 1 ns
(via noise simulator)
10 to 150 Hz, 1.0-mm double amplitude or 70 m/s
2
200 m/s
--10_C to 55_C
25% to 85% (with no condensation)
No corrosive gases
--25_C to 65_C
UL508, CSA22.2
EN50081-2, EN50082-2
DIN 35-mm track
100 N
100 N
I/O Unit interface connector:
Approx. 200 g
Specification
Voltage outputs
4 to 20 mA
600 Ω min.
---
F448 to 0 to 0BB8 full scale
0000 to 1770 full scale
Section 7-2
+10%
/ )
--15%
2
50 N
Current outputs