Omron PRT1-COM Operation Manual page 140

Analog Output Units
Wiring
Output Ranges and
Converted Data
130
Attach MOLEX connectors to the analog output connectors, and connect the
outputs as shown in the following diagram.
Applicable Connectors
Manufac- Connector
turer
MOLEX Pressure- Housing
welded
Crimp p Housing
Reeled contacts
Loose contacts
Crimping tool
Source
24 VDC
The Analog Output Unit converts the digital output data to analog values. The
analog values depend on the output signal ranges, as shown in the following
diagrams.
1 to 5 V
The hexadecimal values 0000 to 1770 (0 to 6000) correspond to an analog
voltage range of 1 to 5 V. The entire output range is 0.8 to 5.2 V.
Voltage
5.2 V
5 V
1 V
0.8 V
0 V
FED4
0000 (0)
8000
(--300)
Model number
521-09-0390
50-57-9403
16-02-0069
16-02-0086
16-02-0096
16-02-0102
p g 570-36-5000
11-01-0209
+ --
External
device
1770 189C
(6000) (6300)
Section 7-2
Remarks
For AWG#24
For AWG#24 to 30
For AWG#22 to 24
For AWG#24 to 30
For AWG#22 to 24
For AWG#22 to 26
For AWG#24 to 30
Converted data
Hexadecimal
7FFF
(Decimal)