Omron PRT1-COM Operation Manual page 89

Transistor Output Units
Dimensions
6-3-3 GT1-OD16MX Transistor Output Unit with Connector (NPN)
Output Specifications
Components
I/O Unit Interface
Communications Connector 1
(on the Communication Unit side)
78
Note V terminals and G terminals are internally connected. When the I/O power is
being supplied, the power can be supplied to the output devices from the V
terminals and G terminals. Current supplied in this way, however, must be less
than 4 A.
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN track.
The Unit therefore extends downward 41.4 mm (including the mounting hook)
from the DIN track center.
Item
Number of outputs
Current per common
TS Indicator (Refer to page 162.)
Output Indicators
Display the status of the outputs.
Lit when an output is ON.
DIN Track Mounting Hook
Terminal Block
Approx. 89
Specifications
16 points
2 A max.
I/O Unit Interface
Communications Connector 2
(on the terminator Side)
Digital Output Connectors
(made by MOLEX)
Connect to output devices,
such as relays and solenoids.
Section 6-3
(Unit: mm)