Omron PRT1-COM Operation Manual page 177

GSD file for PRT1-COM
Slave_Family
Revision
Hardware_Release
Software_Release
; Specific implementation information *****************************************/
Implementation_type = "SPC3"
Redundancy
Repeater_Ctrl_Sig
24V_Pins
Set_Slave_Add_supp
; Media access information ****************************************************/
Auto_Baud_supp
9.6_supp
19.2_supp
93.75_supp
187.5_supp
500_supp
1.5M_supp
3M_supp
6M_supp
12M_supp
MaxTsdr_9.6
MaxTsdr_19.2
MaxTsdr_93.75
MaxTsdr_187.5
MaxTsdr_500
MaxTsdr_1.5M
MaxTsdr_3M
MaxTsdr_6M
MaxTsdr_12M
Min_Slave_Intervall = 10
; DP-slave information ********************************************************/
Freeze_Mode_supp
Sync_Mode_supp
Fail_Safe
Modular_Station
Max_Module
FixPresetModules
Max_Input_Len
Max_Output_Len
168
= 3
= "V1.1"
= "V1.0"
= "V1.1"
= 0
= 2
= 0
= 0
= 1
= 1
= 1
= 1
= 1
= 1
= 1
= 1
= 1
= 1
= 60
= 60
= 60
= 60
= 100
= 150
= 250
= 450
= 800
= 1
= 1
= 1
= 1
= 9
= 1
= 132
= 128
; Slave family = 3 (I/O).
;
; Device revision 1.1.
; Hardware revision 1.0.
; Software revision 1.1.
;
;
;
; Siemens SPC3 ASIC used.
; Redundancy NOT supported.
; Supported, TTL level
; No external 24 Volt input.
;
; Station address is set
; through hardware address
; selectors.
; Automatic baud rate select
; (SPC3 specific feature).
; Supported baud rates:
; 9600 Baud
; 19.2 kBaud
; 93.75 kBaud
; 187.5 kBaud
; 500 kBaud
; 1.5 MBaud
; 3 MBaud
; 6 MBaud
; 12 MBaud
; Max. response times:
; 60 Tbit = 6.25 msec.
; 60 Tbit = 3.125 msec.
; 60 Tbit = 640 usec.
; 60 Tbit = 320 usec.
; 100 Tbit = 200 usec.
; 150 Tbit = 100 usec.
; 250 Tbit = 83 usec.
; 450 Tbit = 75 usec.
; 800 Tbit = 67 usec.
;
; Minimum slave interval =
; 1 msec.
;
;
; Freeze mode supported.
; Sync mode supported.
; Fail safe supported.
;
; Modular station.
; Maximum # of modules: 9.
; Enable fixed modules preset.
; (Siemens Configurators).
; Maximum # of input bytes.
; Maximum # of output bytes.
Appendix A