Satec PM130P Installation And Operation Manual page 4

To prevent potential fire or shock hazard, do not expose the
instrument to rain or moisture.
The secondary of an external current transformer must never be
allowed to be open circuit when the primary is energized. An open
circuit can cause high voltages, possibly resulting in equipment
damage, fire and even serious or fatal injury. Ensure that the current
transformer wiring is made through shorting switches and is secured
using an external strain relief to reduce mechanical strain on the
screw terminals, if necessary.
Setup procedures must be performed only by qualified personnel
familiar with the instrument and its associated electrical equipment.
DO NOT open the instrument under any circumstances.
Modbus is a trademark of Modicon, Inc.
Read this manual thoroughly before connecting the meter to the
current carrying circuits. During operation of the meter,
hazardous voltages are present on input terminals. Failure to
observe precautions can result in serious or even fatal injury or
damage to equipment.
BG0306 Rev. A1
ii