When The Communication Is Disconnected From The Receiver; Settings; Configuration Menu - AOR SDU5600 Instruction Manual

Professional spectrum display unit for use with a companion receiver

Hide thumbs Also See for SDU5600:

Table of Contents

Note: The measuring modes (Spectrum Analyzer mode, Step Resolution Mode, Channel Scope

Mode), frequency span, tuning step, marker frequency, receive mode will not be affected

by pressing the CLR key repeatedly.

5-4 When the communication is disconnected from the receiver

If the communication between the SDU5600 and the receiver is disconnected, the SDU5600

will automatically try to recover it. However, if the communication cannot be recovered after

several retry, the SDU5600 will return to the default mode described above.

To enter the Configuration Menu, press the FUNC key and press the [4] key. Then the

following screen appears.

[RX] key : To select the receiver connected with the SDU5600, press the [RX] key that is defined

as the left of the Special function keys. The [RX] icon will be displayed in reverse

waiting for selection of the receiver. Rotate the main tuning dial to select the desired

receiver model number, and press the [ENT] key ([KHz] key or [MHz] key on the Main

Control Keys) to finish the selection.

[PLOT] key: Pressing the [PLOT] key that is defined as the center of the Special function keys

will toggle between the Plot mode or the Paint mode.

[Paint Mode]

[F-DIR] key: Pressing the [F-DIR] key that is defined as the right of the Special function keys

will toggle between the Reverse mode or the Normal mode.

When the [F-DIR] is set to the Reverse mode, it reverses the direction of display

processing to ensure that ' + ' and ' – ' are correctly implemented.

[Outline Mode]

Table of Contents