Table of Contents
Advertisement
6-6 Basic Settings for Operation
6-6-1 Spectrum Analyzer Mode
On the above screen, the following information is displayed.
Center frequency (CF):
Frequency span:
Start frequency:
End (Stop) frequency:
Marker frequency:
Display step:
Center Frequency (CF)
Press the [CENTER FREQ.] key located between the LCD display and the rotary dial
encoder. The icon indicating the current center frequency will be reversed prompting the
entry of new center frequency. Using either the numeric keypad or the rotary dial encoder,
enter a new frequency followed by the [ENT] key ([KHz] key or [MHz] key.)
If the entered frequency data is valid, the frequency will be accepted and changed.
Frequency Span (SPAN)
122.5 MHz
10.0 MHz
117.5 MHz
127.5 MHz
123.5 MHz
31.25 KHz
17
Advertisement
Table of Contents
