Monitoring Fm Broadcast Frequencies In The Step Resolution Mode - AOR SDU5600 Instruction Manual

Changing the Resolution Band Width (RBW) (from 4 KHz
•
Press the [RBW] key on the numeric keypad.
•
Rotate the Rotary Dial Encoder to select [128 KHz].
•
Press the [ENT] key.
•
As FM broadcast signals are in the Wide FM mode, it is proper to set the RBW to
128 KHz.

7-3 Monitoring FM broadcast frequencies in the Step Resolution Mode

Let's try to monitor FM broadcast signals in the Step Resolution Mode.
•
To go into the Step Resolution Mode, press the [FUNC] key and press the [ 2 ]
key from the numeric keypad.
•
Now, change the display step to [25 KHz]. Press the [SPAN/STEP] key on the
Special Keys.
•
Enter [ 2 ] [ 5 ] key followed by the [KHz] key on the Numeric Keypad.
128 KHz)
32