Adjusting The Audio; Adjusting The Audio Drc; Adjusting The Output Level Of The Different Speakers During Bd/Dvd Playback (Channel Level) - Pioneer BDP-LX91 Operating Instructions Manual

• Black Setup has the effect only for pictures output from the
05
VIDEO and S-VIDEO output terminals, and for NTSC signals
output.
• The items below do not apply to video signals output from the
VIDEO and S-VIDEO output terminals, nor to 480i/576i video
signals output from the COMPONENT VIDEO output terminal
(except when the Output Video Resolution is set to 480i/576i
(page 24)).
– Sharpness High
– Detail
– Black Level
– Hue
 Closing the Video Adjust screen
Press HOME MENU.
 About Pure Cinema
There are two types of video signals:
• Video material – Video signals recorded at 25 or 30 frames/
second
• Film material – Video signals recorded at 24 frames/second
"Pure Cinema" uses signal processing suited for "film material"
when converting 576i/480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.
is displayed on the disc information screen when playing the
"film material" pictures of BD-ROM, BD-R/-RE and DVD-Video discs
(page 29).

Adjusting the audio

Adjusting the Audio DRC

Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when viewing movies late at night and the dialogs are difficult to hear.
1 During playback, display the TOOLS menu.
Press TOOLS.
2 Select and set Audio Adjust.
Use / to select, then press ENTER.
BD PLAYER
TOOLS
40
En
Sharpness Mid
–
White Level
–
Gamma Correction
–
Chroma Level
–
HOME MEDIA
DISPLAY POPUP MENU
GALLERY
MENU
TOP MENU TOOLS
ENTER
TOP MENU TOOLS
ENTER
HOME
MENU RETURN
Audio
Subtitle
Audio Adjust
Video Adjust
Secondary Audio
3 Select and set Audio DRC.
Use / to select, then press ENTER.
Audio Adjust
Audio DRC
Channel Level
Lip Sync
4 Adjust the setting.
TOP MENU
HOME
MENU
Use / to switch between Off, Low, Medium, High and Auto.
Audio DRC
 Closing the Audio DRC screen
Press ENTER or HOME MENU.
Note
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby
Digital audio signals of BDs, DVDs and video files.
• When Auto is selected, the setting has the same effect as High
or Off for Dolby TrueHD signals, depending on the content. For
Dolby Digital Plus and Dolby Digital, the setting has the same
effect as Off.
• Audio DRC affects the audio signals output from the following
audio output terminals:
– Analog audio signals output from the AUDIO OUT (7.1 ch)
terminals.
– Linear PCM audio signals output from the DIGITAL OUT
terminals or HDMI OUT terminals.
• The effect may be weak for some discs.
Adjusting the output level of the
different speakers during BD/DVD
playback (Channel Level)
Caution
• Channel Level of the speakers set to None or No at Speaker
Setup cannot be adjusted (page 46).
1 During playback, display the TOOLS menu.
Press TOOLS.
HOME MEDIA
GALLERY
TOP MENU
TOOLS
ENTER
RETURN
Off
DISPLAY POPUP MENU
MENU
TOOLS
ENTER