Polycom VVX 600 User Manual page 62

In order to use a Bluetooth headset with your phone, you need to enable Bluetooth, pair your headset, and
connect your Bluetooth device to your phone. You can pair up to four Bluetooth headsets with your phone;
however, you can connect only one headset at a time.
The following instructions are intended as a guide, and do not apply to all Bluetooth devices. You can usually find
instructions for your headset on the device manufacturer's web site.
To enable, pair, and connect your Bluetooth headset to your phone:
1 Navigate to Settings > Basic > Bluetooth Settings > Bluetooth Radio. The Bluetooth Radio screen is
displayed.
2 Tap On.
The Bluetooth icon
Bluetooth headset.
3 Turn your Bluetooth headset on and place the headset in Discovery mode.
Refer to your headset documentation for information on how to place your headset in discovery mode.
4 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
5 Tap Scan to find your headset.
All nearby devices in discovery mode are added to the list, and a red Bluetooth icon
each unpaired headset.
6 Select your headset and tap Add to begin the pairing process.
After your headset is added, the Manage BT Headsets screen is displayed. Your headset is paired, and the
Bluetooth icon is displayed next to the headset.
7 Select your headset and select Connect.
The Bluetooth Headset icon
The Bluetooth Headset icon is also displayed in the status bar. If you select the icon, the Bluetooth Settings
screen is displayed.
You can now use your headset to handle calls.
is displayed in the status bar. After the icon displays, you can pair and connect your
is displayed next to your headset after the headset is paired and connected.
is displayed next to
55