It can further be set which temperature is displayed or available at the output
during the measurement.
• [d2] → [q. A no] = [t. h ld. ] During the measurement the previous read-
• [d2] → [q. A no] = [t0]
1: Measuring object in front of pyrometer
2: Limit [DTD]
3: Temperature output [q. A no] = [t0]
4: Previous reading
5: Lower limit of temperature range
6: New reading
7: Temperature output [q. A no] = [t. h ld. ]
ing is available at the temperature output.
During the measurement the temperature is
set to the lower limit of the temperature range.
34
Operating instructions