Xerox Phaser 6510 User Manual page 74

Paper and Media
– Load envelopes with the print side up, flaps closed and down, and going into the printer.
Note: When you load envelopes with the flaps open, in the print driver, select Portrait,
Landscape, or Rotated Landscape, as needed, to have them print correctly. In the
print driver, use Rotate Image 180 Degrees to flip the image, if needed.
4. If the control panel prompts you, verify the envelope size and type on the screen. If not, change
the paper settings.
a. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
b. Navigate to Admin Menu, then press OK.
c. Navigate to Printer Settings, then press OK.
d. To select the paper type, navigate to Paper Type, then press OK.
e. Navigate to Bypass Tray, then press OK.
f. Navigate to Envelope, then press OK.
g. To return to the previous menu, press the Left arrow button.
h. To select paper size, navigate to Paper Size Settings, then press OK.
i. Navigate to Bypass Tray, then press OK.
j. To select an envelope size, press the arrow buttons, select the size, then press OK.
5. To return the printer to Ready, press Menu.
74 Xerox ® Phaser ®
User Guide
6510 Printer