Xerox Phaser 6510 User Manual page 144

Troubleshooting
Symptom
Spots or lines appear at regular
intervals on the prints.
144 Xerox ® Phaser ®
User Guide
Probable Causes
The paper is damp.
The humidity is too high.
One or more of the components in
the paper path is marking the
paper.
6510 Printer
Solutions
that your control panel and print
driver settings are correct.
Replace the paper.
Reduce the humidity in the room
or move the printer to a new
location.
1 Print the Repeating Defects
pages.
For details, refer to Printing
Reports.
2 To determine the cause,
measure the distance between
the print defects.
• 28 mm (1.1 in.) - Drum
Cartridge
• 52 mm (2.1 in.) - Drum
Cartridge
• 94 mm (3.7 in.) - Drum
Cartridge
• 56.5 mm (2.2 in.) - Transfer
Roller
• 63 mm (2.5 in.) - Fuser
• 67 mm (2.6 in.) - Fuser
3 If the repeating defects match
one of the Drum Cartridge
distances, replace the one for
the affected color.
4 If the distance matches the
fuser or transfer roller, call for
service.