Loading Product - Bunn JDF-4D Installation & Operating Manual

DAY PART PRODUCT CHANGE
• Open door.
• Rotate pump lever 90° clockwise.
• Disconnect nozzle from water port tube.
• Unwrap tubing from pump and remove caddy from dispenser.

LOADING PRODUCT

• Product should be refrigerated 24 hours before loading in dispenser.
• Nozzles are located in shipping carton with product.
1. Load the case with bag (corner
folded). Close lid.
4. Open pump lever and load
caddy into machine.
7. Close pump lever.
LOADING THE PRODUCT
2. Remove white dust cap.
5. Wrap tubing around pump.
PRODUCT STORAGE
Always store product with tube up.
9
3. Insert connector. Twist con-
nector ¼ turn clockwise.
6. Set nozzle on water port tube
and snap in place.
53190 120717