The key will unlock the rear case which may then be tilted backward to
access the rear wiring and storage (fig 4.4).
When you are finished, carefully close the rear case and lock it back into
place (fig 4.5). NOTE: make sure that there are no open circuits or loose
wiring BEFORE closing the rear case.
Remove the key and carefully lower the seat plate back to its original
position.
Seat Plate
Step 1
Storage Space
Step 3
FIG 4.2
Seat Release Control
FIG 4.4
Rear Wiring
Seat Plate
Key Slot
(without key)
Step 4
20
FIG 4.3
Key Slot (with key)
Step 2
Rear Case
FIG 4.5