Height Adjustment
Make sure you are properly positioned on the seat attached to the unit.
Take hold of the Height Adjustment Bar and pull it to the left away from the level
teeth. NOTE: keep a tight grip on the Height Adjustment Bar when adjusting.
From here you may adjust the Bar to your desired cutting height. Also adjust the
Height adjustment bar securely into one of the Level Teeth (fig 3.1)
FIG 3.1
Seat Adjustment
FIG 3.1
Height Adjustment Bar
To ensure comfort, you can use the
Seat Lever
When pulling on the seat lever, slide
15
Level teeth
Height Level
Selection
seat lever to adjust the positioning of
the seat along the tracks.
the seat along its tracks to the desired
position.
Then remove your hand
from the seat lever (fig 3.1). NOTE:
Check to see if the seat is secured in
place before proceeding.