HermanMiller Nelson Daybed Installation Instructions

HermanMiller
Daybed Installation
Instructions
For more information about our products and services or to see a list of dealers, please visit us at
www.hermanmiller.com/product-instructions or call 888 - 443 - 4357.
© 2016 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BFR4C - B.
How to assemble
your Daybed.
Safety Instructions & Warning
• Read all instructions before using products
• Failure to fully tighten screws may cause injury
• Periodically check fasteners to ensure tightness
• The right is reserved to make changes at any time without notice
• Will require at least 2 people
• Extra bolts have been included

Tools Required

Phillips Driver

Step 1

With seat cushion facing upside down, lower frame onto cushion. Ensure cushion is centered
on frame then attach using three velcro straps. Straps should be secured in the positions
shown below. Weave one end of the strap in/out of the spring to limit movement.
Ends
HermanMiller

Parts Included

Daybed Frame (1)
Optional: Wood Bolster (1)
OR
Hairpin Leg (4) Wood Leg (4)
Middle
1
Seat Cushion (1)
Optional: Back Cushions (2) Optional: Bolster
or Side Cushion (1) Support
4mm Allen Wrench (1)
Short Bolt (24) Tapping Screw (4)
15th Spring
8th & 9th
Springs
Assembly Instructions
2nd Spring