6
Operating
6.1 Starting the device
6.2 Main menu
Connect the device to the power supply to start operation. After a few seconds the unit is
ready for use.
Press [Mode] to activate the main menu. Press again [Mode] or [Up] | [Down] to call up further
menu items. To activate the respectively shown menu item, press [Setup]. Use [Up] and [Down]
to change the respectively indicated value, and [Setup] to confirm it. With [Mode] you return to
the previous menu level.
If you do not press any key for about 15 seconds, the display will turn off. The set values are
retained even when the device is disconnected from the mains power supply.
Operating
Magic Cube 3D
27
effect panel