Ignition Magic Cube 3d User Manual page 23

Connections in 'Master /
Slave' mode
When you configure a group of devices in 'Master / Slave' mode, the first device controls the
others and allows an automatic, music-controlled and synchronized show. This feature is espe-
cially useful to start a show without much programming. Connect the DMX output of the
master unit to the DMX input of the first slave unit. Then connect the DMX output of the first
slave unit to the DMX input of the second slave unit and so on (maximum 30 slaves).
Installation and starting up
Magic Cube 3D
effect panel
23