Operating Instructions - Ignition LED Accu PAR 64 Floor RGB+W User Manual

A safety rope which already held the strain of a crash or which is defective must not be used
again.
Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved by an
expert!
1.3. Power Connection
!! CAUTION !!
Never leave this device running unattended!! Every person that is involved with this Item has
to be qualified!!
Connect item with the main plug. The voltage and frequency must exactly be the same as
stated on the device. The power plug must always be inserted without force.
1.4. Cleaning and Maintenance
Please make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, fixations and installations spots.
3. No damages must be showed on the power supply cables, material fatigue and
sediments.
If the device is going to be cleaned, please use moist, lint free cloths. Never use alcohol or
solvents!!
The cooling fan must be cleaned monthly!
To clean the interior of the device please use a vacuum cleaner or an air jet.
We recommend cleaning the lenses weekly to keep the light output as long as possible.

2. operating instructions

you can use the unit in different user modes.
DMX Mode – in this mode you can control the unit with a regular DMX lightdesk.
Program Mode – in this mode you can decide between the programs which you find in the unit.
Speed Mode – in this mode you can add the speed from the internal programs.
Sound to light mode – in this mode the unit flashes and change the color to the beat from the music.
5 / 16
L E D A C C U P A R