Ignition Magic Cube 3d User Manual page 31

Dimmer curve Press [Mode] repeatedly until the display shows 'Set' . Press [Setup]. Use [Up] | [Down] to select
the menu item 'Cur' and confirm with [Setup].
With [Up] | [Down] you can select one of the following dimmer curves. The dimmer curve
determines how the brightness increases or decreases depending on the set DMX value.
Display
'Cu-1'
'Cu-2'
'Cu-3'
'Cu-4'
The below figure schematically shows the adjustable dimmer curves. Depending on the
selected DMX value (1) the device lights with a brightness (2) between 0 % and 100 %. Confirm
the selection with [Setup]. Press [Mode].
Meaning
Linear (proportional) course
Quadratic curve with a flat profile at the beginning and a
steep profile at the end (Square)
Inverted quadratic curve with a steep profile at the
beginning and a flat profile at the end (Inv Square)
Non-linear curve with a distinctive flat profile at the
beginning and the end (S-Type)
Operating
Magic Cube 3D
31
effect panel