Installation and starting up
Connections in 'DMX' mode
Magic Cube 3D
22
effect panel
Connect the DMX input of the device to the DMX output of a DMX controller or other DMX
device. Connect the output of the first DMX device to the input of the second one and so on,
to form a series connection.
Such a chain may consist of up to 30 DMX devices. Make sure that the output of the last device
in the chain is terminated by a resistor (110 Ω, ¼ W).
With active display, a dot is lit in the first digit when the unit is in DMX mode. If the dot is not
lit, no valid DMX data is received.