DMX synchronisation
Firmware version
Press [Mode] repeatedly until the display shows 'SEt' . [Setup]. Use [Up] | [Down] to select the
menu item 'SYNC' and confirm with [Setup]. With [Up] | [Down] you can choose how connected
devices behaves in case of a disturbed DMX transmission: 'ON' (devices are synchronised with
each other) and 'Off' (no synchronisation). Confirm the selection with [Setup].
Press [Mode] repeatedly until the display shows 'InFo' . Press [Setup], the display shows 'Ver' .
Press [Setup] to let the device show the firmware version.
Operating
Magic Cube 3D
33
effect panel