1. Manuals
  2. Brands
  3. Ignition Manuals
  4. Light Fixture
  5. ACL LED Par 64
  6. User manual

Ignition ACL LED Par 64 User Manual

Led par
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ACL LED Par 64
LED PAR

Advertisement

Table of Contents
loading

Related Manuals for Ignition ACL LED Par 64

Summary of Contents for Ignition ACL LED Par 64

  • Page 1 ACL LED Par 64 LED PAR...
  • Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 15.05.2020, ID: 477048...

  • Page 3: Table Of Contents

    Connections and controls........................27 Operating..............................30 7.1 Starting the device........................... 30 7.2 Operating on the unit........................30 7.3 Menu overview..........................46 7.4 Functions in 1-channel DMX mode................... 47 7.5 Functions in 2-channel DMX mode................... 47 ACL LED Par 64 LED PAR...
  • Page 4 Table of contents Technical specifications........................48 Plug and connection assignments....................51 Troubleshooting............................52 Cleaning............................... 55 Protecting the environment......................56 ACL LED Par 64 LED PAR...
  • Page 5 ACL LED Par 64 LED PAR...

  • Page 6: General Information

    Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. ACL LED Par 64 LED PAR...

  • Page 7: Further Information

    Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. ACL LED Par 64 LED PAR...

  • Page 8: Notational Conventions

    The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . ACL LED Par 64 LED PAR...

  • Page 9: Symbols And Signal Words

    ð Automatic operation is started. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. ACL LED Par 64 LED PAR...
  • Page 10 This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. ACL LED Par 64 LED PAR...
  • Page 11 General information Warning signs Type of danger Warning – suspended load. Warning – danger zone. ACL LED Par 64 LED PAR...

  • Page 12: Safety Instructions

    Extend the life of the device by regular breaks in operation and avoid switching it on and off frequently. This device is not suitable for continuous use. ACL LED Par 64 LED PAR...
  • Page 13 Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. ACL LED Par 64 LED PAR...
  • Page 14 Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. WARNING! Eye damage caused by high light intensity Never look directly into the light source. ACL LED Par 64 LED PAR...
  • Page 15 Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. ACL LED Par 64 LED PAR...
  • Page 16 Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction. ACL LED Par 64 LED PAR...
  • Page 17 Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. ACL LED Par 64 LED PAR...
  • Page 18 Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. ACL LED Par 64 LED PAR...

  • Page 19: Features

    For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. ACL LED Par 64 LED PAR...

  • Page 20: Installation

    Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. ACL LED Par 64 LED PAR...
  • Page 21 When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. ACL LED Par 64 LED PAR...
  • Page 22 Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be attached to the safety eyelet. ACL LED Par 64 LED PAR...
  • Page 23 Installation Please note that this device must not be connected to a dimmer. ACL LED Par 64 LED PAR...

  • Page 24: Starting Up

    Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. ACL LED Par 64 LED PAR...
  • Page 25 Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). ACL LED Par 64 LED PAR...
  • Page 26 Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on. ACL LED Par 64 LED PAR...

  • Page 27: Connections And Controls

    Connections and controls Connections and controls ACL LED Par 64 LED PAR...
  • Page 28 Navigates upwards in a menu list. Increases the displayed value by one. [Down] Navigates downwards in a menu list. Decreases the displayed value by one. 4 Safety cable eyelet. 5 Locking screw for the two-piece bracket ACL LED Par 64 LED PAR...
  • Page 29 Lockable output socket (Power Twist) for the power supply of further devices (output current max. 16 A) 7 [POWER IN] Lockable input socket (Power Twist) for power supply 8 [DMX OUT] DMX output 9 [DMX IN] DMX input 10 Fuse holder ACL LED Par 64 LED PAR...

  • Page 30: Operating

    To apply settings and changed values, press [Setup]. Press again [Mode] to call up further menu items. To activate the respectively shown menu item, press [Setup]. To return to the previous menu level without change, press [Mode]. ACL LED Par 64 LED PAR...
  • Page 31 Press [Setup] to accept the selection. Use [Up] or [Down] to select a value between ‘Flash 000’ and ‘Flash 099’ to set the flash frequency of the automatic programme. Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 32 This setting is only relevant when the device is controlled via DMX. Make sure that this number matches the configuration of your DMX controller. The following table shows the highest pos‐ sible DMX address for the various DMX modes. ACL LED Par 64 LED PAR...
  • Page 33 ð The device is now working in slave mode, i.e. it will exactly copy the movement of the controlling master device, correct wiring provided. To deactivate slave mode, select ‘No’ and confirm with [Setup]. This setting is only relevant if the device is not controlled via DMX. ACL LED Par 64 LED PAR...
  • Page 34 Press [Setup] to accept the selection. Use [Up] or [Down] to select a value between ‘Flash 000’ and ‘Flash 099’ to set the flash frequency of the dimmer. Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 35 Menu level 3 Function ‘Curves Select’ ‘ Curves 1 linear’ Linear course ‘ Curves 2 Square’ Exponential course ‘Curves 3 Inv Squa’ Logarithmic course ‘Curves 4 S-Type’ S-curve shaped course Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 36 Menu level 3 Function ‘Dimmer Speed’ ‘D-Speed Fast:’ Fast dimming ‘D-Speed Smooth’ Slow dimming ‘D-Speed Halogen’ The imitation of the dim‐ ming behaviour for hal‐ ogen light is activated. Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 37 ‘Time Set 20S’ The display lighting switches off automatically after 20 seconds without pressing a button. ‘Time Set 30S’ The display lighting switches off automatically after 30 seconds without pressing a button. ACL LED Par 64 LED PAR...
  • Page 38 Menu level 3 Function ‘Time Set 60S’ The display lighting switches off automatically after 60 seconds without pressing a button. ‘Time Set ON’ The display lighting remains on per‐ manently. Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 39 Menu level 3 Function ‘Dmx Fail’ ‘Off’ If the DMX control fails, the device is blacked out. ‘Hold’ If the DMX control fails, the last set‐ ting is retained. Press [Setup]to accept the selection. ACL LED Par 64 LED PAR...
  • Page 40 Dimmer fine calibra‐ ‘Dimmer Fine 255’ tion (088) ‘White Bal 000’ … White balance cali‐ ‘White Bal 255’ bration ‘Default Yes’ / ‘Default No’ Default values of the device Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 41 Use [Up] or [Down] to select the menu item ‘Yes’ to reset the device to factory defaults or select the menu item ‘NO’ to retain the stored settings. Press [Setup] to accept the selection. ACL LED Par 64 LED PAR...
  • Page 42 Use [Up] or [Down] to select the menu item ‘Temperature’ . Confirm with [Setup]. ð The display shows the current device temperature. Press [Setup] to close the menu. NOTICE! If the device overheats, the display shows ‘Error’ . Switch off the device. ACL LED Par 64 LED PAR...
  • Page 43 Press [Mode] and use [Up] or [Down] to select the menu item ‘INFO’ . Confirm with [Setup]. Use [Up] or [Down] to select the menu item ‘Software Version’ . Confirm with [Setup]. ð The display shows the current software Version. Press [Setup] to close the menu. ACL LED Par 64 LED PAR...
  • Page 44 Use [Up] or [Down] to select the menu item ‘RDM UID’ . Confirm with [Setup]. ð The display shows the UID code. Press [Setup] to close the menu. Parameter ID Recognition Sent command Received command command DISC_UNIQUE_BRANCH DISC_MUTE DISC_UN_MUTE DEVICE_INFO SOFTWARE_VERSION_LABEL ACL LED Par 64 LED PAR...
  • Page 45 Operating Parameter ID Recognition Sent command Received command command DMX_START_ADDRESS IDENTIFY_DEVICE SUPPORTED_PARAMETERS SENSOR_DEFINITION SENSOR_VALUE DMX_PERSONALITY DMX_PERSONALITY_DESCRIPTION RESET_DEVICE FACTORY_DEFAULTS ACL LED Par 64 LED PAR...

  • Page 46: Menu Overview

    Operating 7.3 Menu overview ACL LED Par 64 LED PAR...

  • Page 47: Functions In 1-Channel Dmx Mode

    7.5 Functions in 2-channel DMX mode Channel Value Function 0 … 255 Dimmer (0 % to 100 %) No function 001 … 180 Even stroboscope effect, increasing speed 181 … 255 Random stroboscope effect, increasing speed ACL LED Par 64 LED PAR...

  • Page 48: Technical Specifications

    0 … 20 Hz Control DMX, buttons and display on the unit Number of DMX channels 1 or 2 Input connections Voltage supply lockable input socket (Power Twist) DMX control XLR chassis plug, 3-pin ACL LED Par 64 LED PAR...
  • Page 49 IP20 Mounting options hanging, standing Dimensions (W × H × D) 274 mm × 388 mm × 398 mm Weight 3.4 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing ACL LED Par 64 LED PAR...
  • Page 50 Technical specifications Further information Construction Par64 Colour mixture LED type Unicoloured Floor housing Fanless Remote control Not possible wireless DMX Housing colour black ACL LED Par 64 LED PAR...

  • Page 51: Plug And Connection Assignments

    The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) ACL LED Par 64 LED PAR...

  • Page 52: Troubleshooting

    Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: ACL LED Par 64 LED PAR...
  • Page 53 DMX controller is switched on. Check the DMX con‐ nectors and cables for proper connection. 3. If the display shows ‘Dmx In’ but there is still no response, check the address settings and the DMX polarity. ACL LED Par 64 LED PAR...
  • Page 54 DMX interface circuit. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. ACL LED Par 64 LED PAR...

  • Page 55: Cleaning

    The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. ACL LED Par 64 LED PAR...

  • Page 56: Protecting The Environment

    Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. ACL LED Par 64 LED PAR...
  • Page 57 Notes ACL LED Par 64 LED PAR...
  • Page 58 Notes ACL LED Par 64 LED PAR...
  • Page 60 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents