About Function & Mode Select Switches - FujiFilm Fujinon UA13x4.5BEZD-T9 Operation Manual

ABOUT FUNCTION & MODE SELECT SWITCHES
The function of some switches incorporated in this lens can be changed to other functions.
The function can be changed by setting switches in the function & mode select switches.
The function & mode select switches are accessible by removing the round rectangular rubber cap on the front of
the drive unit.
PRESET ON/OFF SWITCH
④
RETURN → QUICKZOOM SELECT SWITCH
③
VTR → QUICKZOOM SELECT SWITCH
②
QUICKZOOM ON/OFF SWITCH
①
The illustration shows the positions set at the factory.
①
Qunckzoom ON/OFF Switch
This switch changes the function of the quickzoom & auto cruising zoom switch to ON and OFF.
②
VTR → Qunckzoom Select Switch
This switch changes the function of the VTR switch to that of the quickzoom switch.
(The function of the VTR switch incorporated in the zoom rate demand unit or the shot box linked to this lens
is also changed to that of the quickzoom switch.)
③ Return → Qunckzoom Select Switch
This switch changes the function of the return switch to that of the quickzoom switch.
(The function of the return switch incorporated in the zoom rate demand unit or the shot box linked to this
lens is also changed to that of the quickzoom switch.)
④ Preset ON/OFF Switch
This switch changes the preset function to ON and OFF.
FUNCTION & MODE SELECT SWITCHES
- 18 -
Rubber Cap