General Description; Installation Onto Camera - FujiFilm Fujinon UA13x4.5BEZD-T9 Operation Manual

GENERAL DESCRIPTION

This lens is a bayonet mount type zoom lens developed for a color TV Camera.

INSTALLATION ONTO CAMERA

PIN
CAMERA
MOUNT CLAMP RING
■ INSTALLATION ONTO CAMERA
Note. Prior to installation of the lens, turn off the power of the camera.
WARNING Be sure to attach all the parts securely.
Dropping any parts from a height may cause severe accidents.
a. Take the rear lens cap off.
b. Rotate the mount clamp ring on the camera fully counterclockwise.
c. Fit the mounting surface of the lens to that of the camera aligning the pin on the lens with the slot in the
camera.
d. Rotate the mount clamp ring fully clockwise.
e. Connect the cable of the lens to the connector, provided for the lens, on the camera.
Note. Make sure to adjust the flange focal length when installing the lens on a camera for the first time or
installing it on another camera (refer to the next page for details).
- 2 -