FUNCTION SWITCH
⑧
IRIS A-M POSITION CHANGE SWITCH
⑦
IRIS COMPENSATION ON/OFF SWITCH
⑥
AUTO CRUISING ZOOM ON/OFF SWITCH
⑤
The illustration shows the positions set at the factory.
⑤
Auto Cruising Zoom ON/OFF Switch
This switch changes the auto cuising zoom function to ON and OFF.
If this switch is set to OFF, an auto cruising zoom operation cannot be perfomed from all the switches that are
set as an auto cruising zoom switch.
⑥
IRIS Compensation ON/OFF Switch
This switch changes the iris compensation function to ON and OFF.
Note. In the iris remote mode, the image of the picture darkens when the extender is used. The iris compensation
function prevent this happening.
⑦
IRIS Auto-Manual position change Switch
The positions of the auto iris mode and the manual mode set in the iris mode select knob can be interchanged by
setting this switch.
⑧
Function Switch
Using this switch, the preset operation mode can be selected.
OFF : Zoom Preset Operation
ON : Zoom and Focus Simultaneous Preset Operation
FUNCTION & MODE SELECT SWITCHES
- 19 -
Rubber Cap