■ Extender Select Lever
To use the built-in extender, rotate the extender
select lever to align the letters "×2" with the
index mark.
■ VTR Switch
Operation of this switch starts or stops the VTR
linked to the camera.
Note. The VTR switch operates only when the
camera supports the function of the switch.
Note.
If the setting of the function & mode select
switches is properly arranged, this switch
works as a quickzoom switch or a
quickzoom & auto cruising zoom switch.
(refer to page 18)
■ Return Switch
While pressing this switch, the return video
picture can be seen through the viewfinder
of the camera.
Note.
The return switch operates only when the
camera supports the function of the switch.
Note.
If the setting of the function & mode select
switches is properly arranged, this switch
works as a quickzoom switch or a
quickzoom & auto cruising zoom switch.
(refer to page 18)
■ Connector for Expansion
This connector can be used in two applications
listed below.
(1)
To control the lens from a personal computer.
(2)
To use the lens in a virtual studio system.
(This connector outputs encoder signals.)
OTHER FUNCTIONS
INDEX MARK
- 17 -
VTR SWITCH
EXTENDER SELECT LEVER
RETURN SWITCH
CONNECTOR FOR EXPANSION