Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback - Samsung VP-D5000i Owner's Instruction Manual

ENGLISH

Playback

Connecting to a TV which has No Audio and Video Input Jacks

You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder to the VCR with the Audio/Video cable.
The Yellow plug : Video
The White plug : Audio(L)
The Red plug : Audio(R) - STEREO only
2. Connect the TV to the VCR.
3. Set the device to CAMCORDER.
4. Set the power switch to PLAY mode.
5. Turn on both the TV and VCR.
Set the input selector on the VCR to LINE.
Select the channel reserved for your VCR on the TV set.
6. Play the tape.
Playback
You can play the recorded tape in PLAY mode.
1. Connect a power source and set the device to CAMCORDER.
2. Set the power switch to PLAY mode.
3. Using the (FF) and
you wish to play back.
4. Press the (PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind automatically.
Note
The playback mode (SP/LP) is selected automatically.
78 78
(REW) buttons, find the first position
VIDEO
AUDIO(L)
VCR
AUDIO(R)
S-VIDEO
Multi A/V
cable
TV
ANTENNA
FADE
S.SHOW
BLC
REV FWD
CAMCORDER