Chapter 7 Dhcp Server; Dhcp Settings - Tenda 3G150M User Manual

Chapter 7 DHCP Server

DHCP server is for the 3G Router, signal amplification and
wireless Router mode.

7.1 DHCP Settings

DHCP (Dynamic Host Control Protocol) is to assign an IP address
to the computers on the LAN/private network. When you enable
the DHCP Server, the DHCP Server will allocate automatically an
unused IP address from the IP address pool to the requesting
computer in premise of activating "Obtain an IP Address
Automatically". So specifying the starting and ending address of
the IP Address pool is needed.
DHCP Server: Activate the checkbox to enable DHCP server.
IP Address Start: Enter the range of IP address pool for
DHCP server distribution.
IP Address End: Enter the range of IP address pool for DHCP
server distribution.
Lease Time: The length of the IP address lease.
54