U.tilt-In-Space Mechanism; Stroller Handle Extension; W.reclining Back - Sunrise Medical Quickie Iris Owner's Manual

ENG LI S H
U. TILT-IN-SPACE MECHANISM
The tilt-in-space mechanism is installed by Sunrise. Two cable/trigger mechanisms positively lock the chair in
place from -5º to 60º depending on the set-up.
The Quickie/Zippie IRIS has the capability to provide from 0º to 5º of forward tilt. DO NOT ATTEMPT TO
MAKE THIS ADJUSTMENT. This adjustment must be done by an authorized supplier.
1. Trigger Tilt Operation
a. Depressing both triggers (A) at the same time disengages the locking mechanism and allows the seat
and back to rotate in space. Releasing the triggers positively locks the rockers in place.
b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).
c. To lock out the tilting function, insert the locking pin (B) into the trigger holder.
28
2. Foot Release
a. Depressing foot pedal (D) disengages the locking mechanism and allows the seat and back to rotate in
space. Releasing the foot pedal positively locks the rockers in place.
b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).
V. STROLLER HANDLE EXTENSION (option)
Installation
a. Press button (E) on the stroller handle so that release pins are drawn inside the tube.
b. Insert the tube into the back tube receiver (F) until the release pin protrudes through the receiver
mounting hole.
W. RECLINING BACK
The dual trigger reclining mechanism is installed by Sunrise.
To Recline or Raise Backrest
a. Depress both triggers (G) at the same time. Releasing the triggers positively locks the backrest in
place within its 60° range.
b. To lock out the adjustment system, insert the locking pin (H) into the trigger holder.
NOTE - ALWAYS lock the dual trigger reclining mechanism securely in place after positioning the backrest
MK-100151 Rev. B
27
29
30
18
VIII. USE AND MAINTENANCE
F
E
G
28
29
30
H