Guangzhou ZHIYUAN Electronics Co., Ltd.
Click the "Install" button to copy the file into the installation directory, and the prompt
interface shown in Figure 6-4 will pop up after the installation is completed, then click
the "Finish" button to exit installation.
Now the configuration software is installed successfully. You are required to check
whether the CANWiFi-200T device and the PC network interface card are properly
connected via network cable.
6.2 Obtain device configuration information
Run the ZNetCom software and the interface shown in Figure 6-5 will appears.
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
Figure 6-3: Select installation directory
Figure 6-4: Installation completed
29
CANWiFi-200T User Manual
©2017 Guangzhou ZHIYUAN Electronics
V1.02