Ap Hotspot Mode - ZLG CANWiFi-200T User Manual

Guangzhou ZHIYUAN Electronics Co., Ltd.
Figure 4-2: Use the ZNetCom software to search for the device

4.1 AP Hotspot Mode

AP mode means that CANWiFi-200T as a wireless hotspot accepts the connection from
other WiFi devices, just like a wireless router. This mode can be configured via
ZNETCOM software. After get the device information as shown in Figure 4-3, select
"Wireless mode" as AP and set the wireless band (the default value is 7) in the "WIFI
Information". The "WIFI name" is the SSID broadcast name that can be searched; the
encryption mode is "no password" or "WPA / WPA2"; users can choose "no encryption"
or "WPA / WPA2 encryption mode", the latter one requires users to fill in the password in
the following "WIFI password" so that only visitors who know the password can
connected to CANWiFi.
After the modification is submitted, restart the device to enter the normal operation, and
then PC or other WiFi devices can search the "CANWIFI-200T" SSID broadcast of
CANWiFi-200T, as shown in Figure 4-4.
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
Figure 4-3: Set AP hotspot mode
23
CANWiFi-200T User Manual
©2017 Guangzhou ZHIYUAN Electronics
V1.02