Pc And Device Network Segment Detection - ZLG CANWiFi-200T User Manual

Guangzhou ZHIYUAN Electronics Co., Ltd.

3.3 PC and Device Network Segment Detection

Before using PC to communicate with the CANWiFi-200T device, users should ensure
that there is an Ethernet card in the user's PC. Moreover, PC and the CANWiFi-200T
device must be in the same network segment.
A default IP address (192.168.0.178) and network mask (255.255.255.0) are set for a
CANET device in the factory. Users can check whether the device and the PC are in the
same network segment according to the process shown in Figure 3-4. If they are in the
same network segment, you do not need to read the following PC network setting
information. If not, then the information of this network setting is very important for you.
Figure 3-4: Check whether the CANWiFi-200T device IP and PC are in the same
The following information explains how to make the PC and CANWiFi-200T device in
the same network segment.
If users use the operating system of Windows2000/XP/7, then there are two ways to do
it, one is to add local IP address and the other is to modify local IP address.
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
Figure 3-3: Search the device
network segment
13
CANWiFi-200T User Manual
©2017 Guangzhou ZHIYUAN Electronics
V1.02