Guangzhou ZHIYUAN Electronics Co., Ltd.
2.3 Ethernet Interface and WLAN Antenna
The appearance of CANWiFi-200T Ethernet interface (RJ45) and WLAN antenna are
shown in Figure 2-3, and each pin definition is listed in Table 2-1. There are two
indicators. The green light is LINK indicator, which indicates whether the Ethernet is
connected. The yellow light is data indicator, which flashes when there is Ethernet data
transmission.
2.4 Restore Factory Settings and Reset Button
The Reset button is used to reset the device manually, as shown in Figure 2-4. Press it
1 second to reset the device. The DEF button is used to restore the factory settings.
Press it and hold for 5-10 seconds until the system SYS extinguish, and then the device
restores factory settings automatically.
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
Figure 2-2: Power interface
Figure 2-3: RJ45 interface appearance
Table 2-1: RJ45 pin definition
Pin No.
1
2
3
6
7
CANWiFi-200T User Manual
Pin Definition
Tx+
Tx-
Rx+
Rx-
©2017 Guangzhou ZHIYUAN Electronics
V1.02