Communication Between Canwifi-200T And Usbcan Interface Card - ZLG CANWiFi-200T User Manual

Guangzhou ZHIYUAN Electronics Co., Ltd.
DNS field can be ignored). Click OK on this page as well as on the "Local Area
Connection Properties" page, and wait for system configuration completion.
Now, the CANWiFi-200T device can communicate with the PC.
3.4 Communication between CANWiFi-200T and USBCAN
Interface Card
We need a device with CAN port to help demonstrate how the CANWiFi-200T device
implements bidirectional transparent conversion of CAN network data and Ethernet
data. Here we use the USBCAN-II interface card, which is very convenient to use, and
its related information can be found on the website http://www.zlg.cn/.
First, connect the CANWiFi-200T device to a PC with the cable, and connect the
CANWiFi-200T CAN0 port to the USBCAN-II CAN0 port with the twisted pair (the CANH
terminals are connected; the CANL terminals are connected; pay attention to configure
a 120 ohm terminal resistance). And then use the USB cable to connect the USBCAN-II
interface card to the PC, and finally power up the USBCAN-II interface card and
CANWiFi-200T device. Then run the CANtest software on the PC (as shown in Figure
3-10). The CANtest test software can be found in the product CD (need to install).
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
Figure 3-9: TCP/IP properties
16
CANWiFi-200T User Manual
©2017 Guangzhou ZHIYUAN Electronics
V1.02