List Of Pictograms Used; Introduction; Intended Use - Parkside PTS 500 C3 Operation And Safety Notes

List of pictograms used:

Read the instruction manual.
Use in dry indoor rooms only.
Switch off the product and disconnect
it from the mains before replacing
attachments, cleaning and when not
in use.
Protection class II (Double insulation)
Alternating current
Protect batteries against heat and
continuous intense sunlight.
Protect batteries against water and
moisture.
Protect batteries from fire.
PLUNGE SAW
PTS 500 C3

Introduction

Q
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use
the product as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
6 GB / IE / NI / CY
Wear ear protection!
Wear eye protection!
Wear a dust mask!
Wear protective gloves!
Wear protective, slip-resistant footwear!
Not permitted for wet cutting!
Laser radiation
Do not stare into the beam!
Not permitted for face grinding

Intended use

Q
This plunge saw (hereinafter "product" or "power
tool") is designed for sawing longitudinal and
cross cuts in a plunge saw cut into firmly supported
solid wood, chip board, plywood, plastics,
aluminium, copper, bricks, concrete, stone and
lightweight construction materials.
The product is to be used by adults. Children under
the age of 16 are not allowed to use the product.
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries and
damage. The manufacturer is not liable for any
damages caused by improper use. The product is
not intended for commercial use or for any other
use.