Yeti Cycles SB4.5 Owner's Manual page 4

THE LOWDOWN ON THE
SB4.5 AND ITS FEATURES.
1. SWITCH INFINITY TECHNOLOGY PATENTED SUSPENSION SYSTEM
2. HIGH MODULUS CARBON FIBER MAIN FRAME AND SWING ARM
3. COLLET AXLE SYSTEM ON PIVOTS REDUCES BEARING WEAR
4. OPTIMIZED FOR 1X DRIVETRAINS ONLY
5. TAPERED INSET HEAD TUBE (44MM/56MM)
6. SUSPENSION BY FOX (7.5 X 2.0)
7. CUSTOM DEBRIS AND CHAIN SLAP GUARDS
8. INTERNAL CABLE ROUTING
9. INTEGRATED AXLE AND DERAILLEUR HANGER SYSTEM
8.
1. The SB4.5 delivers 4.5 inches (114mm) of travel with our patented
Switch Infinity Technology. Efficient pedaling performance while still
smooth and continuous when the going gets rough.
2. High modulus carbon provides a stiff, strong and light weight
chassis. (5.4 lbs)
3. Colleted pivot axles help create a stiff interface between the
front and rear triangles of the frame. Custom Enduro Max sealed
bearings keep things moving freely at the pivots.
4. The SB4.5 does away with the front derailleur mount, making it a 1x
drive specific frame. This increases stiffness in the frame, making
the SB4.5 one of the stiffest bikes in our lineup.
5. Using our inset head tube on the SB4.5 allows for a larger head
tube with more area, increased stiffness, and lower overall ride
height without compromising any performance.
6. The SB4.5 uses a 2 inch stroke, 7.5 inch eye to eye Float EVOL
shock, by Fox Racing Shox.
7. Custom guards on the seat stay, chain stay and down tube keep
things quiet while riding and protect the frame.
8. The SB4.5 features internal routing for all cables, making the bike
quiet and clean looking as well as reducing cable rub on the paint.
9. Dedicated 12 x 148 Boost dropouts and integrated hanger with
axle threads for strength, stiffness, ease of hanger and wheel
installation.
9.