Getting Started; Description Of Keypad Functions - LaMotte DO 6 PLUS Instructions Manual

2. GETTING STARTED

2.1

Description of Keypad Functions

The meter has 6 keys on a splash-proof keypad. Some buttons have
multiple functions depending on the mode of operation.
Powers meter on and off. Meter starts up in the
ON/OFF
measurement mode that was last used.
Enters into calibration mode. Pressing while in calibration
CAL
mode will abort calibration without conf rming value.
Selects desired measurement mode. When pressed
MODE
simultaneously with ON/OFF, it will go to the SETUP
mode.
Freezes measured reading. Press again to resume live
HOLD
reading.
Conf rms calibration value in calibration mode and
ENTER
conf rm selections in SETUP mode.
Increments/decrements values during calibration mode or
scroll through SETUP menus. Set offset adjustments and
conf guration settings.
6