Switching The Meter On; Changing Mode - LaMotte DO 6 PLUS Instructions Manual

2.8

Switching the Meter On

Press ON/OFF to power up the meter. The meter will
cycle through various setup parameters.
1. All LCD segments will brief y illuminate.
2. The model name [DO 6] will display next along
with mg/l, ppm, and % annunciators.
3. Next, the meter revision number [r #.##] is
shown brief y before beginning measurement.
4. The meter will be in the measurement mode
that was in use when it was powered off—%,
mg/l, ppm, or T.
2.9 Changing the Mode
Press MODE to switch between percentage saturation (%), concentration
(mg/L)(ppm), and temperature (T) measurement.
A
%
MODE
A
mg/l
MODE
TA
MODE
Automatic Temperature
Compensation
Percentage Saturation
Concentration Mode
Temperature Mode
11
ON
OFF
CAL 13 CAL 24 TAvg
mg/l
NTU
ppm
%pH
mg/l
ppm
%
A
%