Automatic Shut Off (Ato.4); Reset To Factory Default (Rst.5) - LaMotte DO 6 PLUS Instructions Manual

5.6

Automatic Shut Off (AtO.4)

Use this feature to conserve batteries. When active, the meter will
automatically shut off 20 minutes after the last key press.
1. From the setup menu, press
select "AtO.4".
2. Press HOLD/ENTER to enter the menu.
3. Use
automatic off) or NO (activate automatic
off).
4. Press HOLD/ENTER to conf rm.
5. Press CAL to return to the measurement
mode.
5.7

Reset to Factory Default (rSt.5)

Use this mode to reset the meter to the factory default settings. There are
two levels of reset:
Calibration (A.CAL) resets calibration values only.
User (b.USR) resets all data, calibration, and other customized setup
functions.
1. From the setup menu, press
select "rSt.5".
2. Press HOLD/ENTER to enter the menu.
3. Press HOLD/ENTER to enter calibration
reset "A.CAL".
4. Use
calibration) or NO (do not reset calibration).
5. Press HOLD/ENTER to conf rm.
If "YES", the meter will return to
measurement mode after resetting.
Note: Both % and concentration
calibrations are reset from the % saturation
setup. However, when calibration reset
occurs from the concentration setup, only
concentration is reset.
If "NO", the User Reset menu "b.USR" is
displayed.
or to select YES (activate
or to select YES (reset
or to
or to
26
HOLD
ENTER
HOLD
ENTER
Calibration
HOLD
Reset
ENTER