Advertisement
USING ThE LIGhT (LIGhT) (SC-D382/D383/D385 ONLY)
•
The Light function works only in Camera and M.Cam mode.
➥
page 18
•
The Light function enables you to record a subject
in a dark place without compromising colors.
For example, you can satisfactorily record the
environment of nocturnal animals for observation
when you use this function.
1. Set the Select switch to CARD or TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"Camera", then press the Joystick or move the
Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Light", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select
"On", then press the Joystick.
•
To cancel the Light function, set the "Light"
menu to "Off".
7. To exit, press the MENU button.
•
Light (
) indicator will be displayed.
•
The light can become extremely hot.
•
Do not touch it while in operation or soon
WARNING
after turning it off, otherwise serious injury
may occur.
•
Do not place the camcorder into the
carrying case immediately after using the
light, since it remains extremely hot for
some time.
•
Do not use near fl ammable or explosive
materials.
The range of the light is limited. (up to 2m (6.6ft))
59_ English
使用燈 (LIGhT)（僅適用於 SC-D382/D383/D385）
•
燈光功能可在 Camera 和 M.Cam 模式下操作。
MODE
CARD
TAPE
(SC-D383/D385 only)
BATT.
).
Camera Mode
Camera
Auto
Program AE
�
Auto
White Balance
�
Off
Visual Effect
�
On
16:9 Wide
�
Macro
Off
�
DIS
Off
�
Move
Select
MENU
Camera Mode
Camera
BLC
Digital Zoom
C.Nite
Light
Off
On
✔
Move
Select
MENU
0:00:10
STBY
SP
16:9 Wide
10Sec
16:9 Wide
No Tape !
1/50
M
29
W
T
12:00 1.JAN.2008
•
燈光功能可讓您錄製黑暗中的主體、並且不會降
低色彩。例如、當您使用此功能時、您可以滿意
地錄製夜間所看到的夜行動物。
1. 將選擇開關設定為 CARD 或 TAPE。 （僅適用於
1.
SC-D383/D385）
2. 按下 MODE 按鈕以設定 Camera (
2.
3. 按下 MENU 按鈕。
3.
•
將會顯示選單清單。
4. 向上或向下移動 Joystick ( ▲ / ▼ ) 以選擇
4.
"Camera"、然後按下 Joystick 或向右移動
Joystick ()
5. 向上或向下移動 Joystick ( ▲ / ▼ ) 以選擇 "Light"、
5.
然後按下 Joystick。
6. 向上或向下移動 Joystick ( ▲ / ▼ ) 以選擇 "On"、
6.
然後按下 Joystick。
•
若要取消燈光功能、可將 "Light" 選單設定為
"Off"。
Exit
7. 要結束、可按下 MENU 按鈕。
7.
•
Light (
) 指示器將會顯示。
•
燈光將會過熱。
•
切勿在操作時或熄滅後馬上觸摸它、否則可
警告
能導致嚴重受傷。
•
請勿在使用燈光後立刻將攝錄放影機放入攜
帶套中、因為它在此時仍舊過熱。
Exit
•
切勿靠近易燃性或爆炸性材料。
燈光功能的範圍相當有限。
60min
（最遠 2 米（6.6 英尺） ）
16BIt
S
C.Nite 1/30
➥
第 18 頁
).
臺灣 _59
Advertisement
Chapters
