Advertisement
VIEWING THE DEMONSTRATION(DEMONSTRATION)
•
Demonstration automatically shows you the major
functions that are included with your camcorder so
that you may use them more easily.
•
The demonstration function may only be used in
the Camera mode without a tape inserted in the
camcorder. ➥page 18
•
Before you begin: Make sure that there is no tape
inserted in the camcorder. page 34
•
The demonstration operates repeatedly until the
demonstration mode is switched off.
1. Set the Select switch to TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"System", then press the Joystick or move the
Joystick ()to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Demonstration", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select
"On", then press the Joystick.
7. Press the MENU button.
•
The demonstration will begin.
8. To quit the demonstration, press the MENU button.
•
The demonstration function is automatically
activated when the camcorder is left idle for
more than 10 minutes after switching to the
Camera mode (if no tape is inserted in the
camcorder).
•
If you press other buttons (MENU, Joystick,
EASY.Q...) during the demonstration mode, the
demonstration stops temporarily and resumes
10 minutes later if you do not operate any
otherfunctions.
•
The demonstration mode displays in 4:3 aspect
ratio on the LCD screen.
9_ English
觀賞示範畫面(DEMONSTRATION)
CARD
TAPE
MODE
(SC-D383/D385 only)
BATT.
Camera Mode
System
Clock Set
).
On
Remote
�
On
Beep Sound
�
On
Shutter Sound
�
English
Language
�
Demonstration
On
�
Move
Select
MENU
Camera Mode
System
Clock Set
Remote
Beep Sound
Shutter Sound
Language
Off
Demonstration
On
✔
Move
Select
MENU
SAMSUNG Camcorder is...
34x Optical Zoom
1200x Digital Zoom
Multi-Visual Effect
Demonstration
•
•
示範畫面將自動顯示攝錄放影機中的主要功能、讓
您可以更輕鬆地使用這些功能。
•
•
示範畫面功能僅可以在 Camera 模式中使用、並且
攝錄放影機中必須沒有插入錄影帶。➥ 第 18 頁
•
•
開始使用之前：請確定攝錄放影機中沒有插入錄影
帶。➥ 第 34 頁
•
•
示範畫面會重複操作直到關閉示範畫面模式。
1. 將選擇開關設定為 TAPE。 （僅適用於 SC-D383/
1.
D385）
. 按下 MODE 按鈕以設定 Camera (
.
3. 按下 MENU 按鈕。
3.
•
將會顯示選單清單。
4. 向上或向下移動 Joystick ( ▲/▼ ) 以選擇
4.
"System"、然後按下 Joystick 或向右移動
Joystick ()
Exit
5. 向上或向下移動 Joystick ( ▲/▼ )以選擇
5.
"Demonstration"、然後按下 Joystick。
6. 向上或向下移動 Joystick ( ▲/▼ ) 以選擇 "On"、
6.
然後按下 Joystick。
7. 按下 MENU 按鈕。
7.
•
示範畫面將會開始。
8. 若要結束示範畫面、請按下 MENU 按鈕。
8.
Exit
•
切換到 Camera 模式（攝錄放影機中沒有插
入錄影帶）後、若攝錄放影機處於閒置狀態
超過 10 分鐘、示範畫面功能將會自動啟動。
•
若您在示範畫面模式下按下其他按鈕
（MENU、Joystick、EASY.Q...） 、示範畫面
將暫時停止、並在您沒有操作任何其他功能
的 10 分鐘後恢復。
•
示範畫面模式會以 4:3 畫面比例顯示在 LCD
螢幕上。
).
臺灣 _9
Advertisement
Chapters
