Download Print this page

Initial Setting:display Menu Setting - Samsung SC-D383 Manual

Digital video camcorder
Hide thumbs Also See for SC-D383:

Advertisement

initial setting:display menu setting

DISPLAYING THE DATE / TIME (DATE / TIME)
The date/time function works in Camera / Player /
M.Cam / M.Player modes. ➥page 18
The date and time are automatically recorded on a
special data area of the tape.
1. Set the Select switch to CARD or TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera (
Player (
).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"Display", then press the Joystick or move the
Joystick ()to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Date/Time", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select the
date/time display type, then press the Joystick.
Date/Time display type:
"Off", "Date", "Time", "Date&Time".
7. To exit, press the MENU button.
On charging the built-in rechargeable battery
Your camcorder has a built-in rechargeable battery to
retain the date, time, and other settings even when the
power is off. The built-in rechargeable battery is always
charged while your camcorder is connected to the wall
outlet via the AC power adaptor or while the battery
pack is attached. The rechargeable battery will be fully
discharged in about 3 months if you do not use your
camcorder at all. Use your camcorder after charging the
built-in rechargeable battery. If the built-in rechargeable
battery is not charged, any input data will not be backed
up and the date/time appears on the screen as "12:00
AM JAN. 1.2008" (when "Date/Time" display is set to "On").
The date/time will read "12:00 AM JAN. 1.2008" in the
following conditions:
-
When the built-in rechargeable battery becomes
weak or dead.
-
If the movie or photo recording was made before
setting the date/time in the miniDV camcorder.
The same functional button exists on the remote control
as well. Press it once to display the date "JAN. 1.2008",
press it twice to display the time and press it again to
display both time and date on the screen.
3_ English
起始設定:顯示選單設定
顯示日期/時間(DATE / TIME)
CARD
TAPE
(SC-D383/D385 only)
) or
BATT.
Camera Mode
Display
Off
Guideline
LCD Bright
LCD Color
Off
Date/Time
On
TV Display
Move
Select
Camera Mode
Display
Guideline
LCD Bright
LCD Color
Off
Date
Date/Time
TV Display
Time
Date&Time
Move
Select
日期 / 時間功能可在 Camera / Player / M.Cam /
M.Player 模式下操作。 ➥ 第 18 頁
日期和時間會自動記錄在錄影帶的特殊資料區域。
MODE
1. 將選擇開關設定為 CARD 或 TAPE。 (僅適用於
1.
SC-D383/D385)
. 按下 MODE 按鈕以設定 Camera (
.
3. 按下 MENU 按鈕。
3.
將顯示選單清單。
4. 向上或向下移動 Joystick ( ▲ / ▼ ) 以選擇
4.
"Display"、然後按下 Joystick 或向右移動
Joystick ()
5. 向上或向下移動 Joystick ( ▲ / ▼ )以選擇 "Date/
5.
Time"、然後按下 Joystick。
6. 向上或向下移動 Joystick ( ▲ / ▼ ) 以選擇日期
6.
/ 時間、然後按下 Joystick。
日期 / 時間顯示類型:"Off", "Date", "Time",
"Date&Time"。
7. 要結束、可按下 MENU 按鈕。
7.
為內置充電式電池充電
您的攝錄放影機具有內置充電式電池、以在關
閉電源時保留日期、時間和其他設定。在透過
交流電源適配器將攝錄放影機連接到牆上插座
時或安裝電池組時、內置充電式電池總是處於
充電狀態。如果您不想使用攝錄放影機、充電
式電池將在大約 3 個月內完全放電。在充電內
置充電式電池後、使用攝錄放影機。
MENU
Exit
如果內置充電式電池沒有充電、將無法複製任
何輸入資料、 且會在螢幕上出現如下日期 / 時間 :
"12:00 AM JAN. 1.2008"(當 "Date/Time" 顯
示為 "On" 時)
在下列情況下、日期 / 時間將顯示為 "12:00 AM
JAN. 1.2008"。
- 當內置充電電池電量低或無電量時。
- 如果在設定日期 / 時間(在 miniDV 攝錄放
影機中)之前進行影片或相片錄製。
遙控器上也有相同的功能按鈕。按一次便會顯
MENU
Exit
示日期 "JAN.1.2008"、按兩次便會顯示時間、
再按一次便會顯示時間和日期。
) 或Player (
).
臺灣 _3

Advertisement

loading

This manual is also suitable for:

Sc-d385Sc-d382Sc-d381