Table of Contents
Advertisement
4. Mounting the lifting pole (accessories).
a) Push the lifting pole bottom piece in the fitting under the backrest.
b) Mount the enclosed screws and nuts and tighten them.
5. Mounting the mattress support extension (10 cm).
•
It is not possible to use the wooden siderail in combination with mattress support extension.
Therefore dismount the wooden side rails first.
The mattress support extension can be mounted in either the head- or foot end.
a) Loosen screws from the bed end.
b) Remove the bed end.
c) Remove the ferrules in the tube ends for the mattress support
and mount the extension.
d) Tighten up with the enclosed screws.
e) Mount the bed end in the outer position (4 screws per fitting).
(Visible insertpipe is about 14.5 cm).
12
Advertisement
Table of Contents
