Invacare Octave User Manual page 8

Adjusting the height of the lifting pole
Loosen the cord as shown in fig. A. The lifting handle can
now be adjusted to the desired height. Press the cord
together as shown in fig. B and check that the cord is
locked in the cord lock by pulling the handle.
Emergency release of the mattress support parts
An emergency release of the mattress support is
necessary in the case of e.g. a power or motor failure.
An emergency release of the height adjustment is
NOT possible!
•
Remove the plug from the mains before
emergency release of the mattress support.
•
In an emergency case the mattress sections are released
by pulling out the cotter pin from the motor in question.
A minimum of 2 people are required to release a mattress section. Both people should hold the
mattress section in locked position. One person pulls out the cotter pin.
Both slowly lower the mattress section until it is completely down.
A
7
B