Cleaning; Technical Specifications; Electrical Data - Invacare Octave User Manual

Nursing bed

Hide thumbs Also See for Octave:

Table of Contents

13. Cleaning

The Invacare®Octave cannot withstand cleaning in washing machines nor flushing with a water jet.

Use ordinary household detergents. Dry the bed after cleaning.

Never use acids, alkalines or solvents. Please make sure the power plug is removed from the socket.

Important details for cleaning hand control, control unit and motors

IP 66: Always clean with water and brush. Water may be pressurised, but never use high-pressure cleaning or

steam cleaning directly on the units.

All measurements are stated in cm. All angles are stated in degrees. All measurements and angles are stated

without tolerances.

Invacare®reserves the right to change the stated measurements and angles without warning.

Max. patient weight: 350 kg (provided that bed ends cot sides and accessories do not exceed 35kg)

Room temperature: 10° - 40°

Voltage supply: 230 V AC / 50 Hz.

Max. current input: 1 A.

Intermittent (Duty cycle of motors): 10% max. 6 min/h.

Protection class: IP 66.

Insulation class: II, type B.

Output: 70 VA

The patient is not separated from the ground and the chassis.

Double insulated.

The control unit has no isolator, disconnecting the plug is the only means of isolating the power supply.

Sound level: 48 dB (A).

Table of Contents