Table of Contents
Advertisement
Quick Links
G5 Controller Models
PL800, PL1600, PL4800
Owner's Manual
PROGRAM
PGM
NEXT
BACK
LANGUAGE
ENGLISH
ESPAÑOL
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
ADVANCED
PRESS TO START
MANUAL PROGRAM
UP
DOWN
RAIN/FREEZE
ON
SENSOR
OFF
RUN
SYST E M O F F
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
MONTHLY % ADJUST
MENU
Advertisement
Table of Contents
Related Manuals for Weathermatic ProLine 1600 Series
Summarization of Contents
Getting Acquainted With Your ProLine Controller
ProLine Control Panel Overview
Overview of the controller's LCD display, including time, battery status, and fault indicators.
Controller Programming Basics
Introduction to the controller's programming using buttons and dial positions.
Controller Programming
Setting Current Time and Date
Guide for accurately setting the controller's current time and date.
Program Start Times
How to set specific start times for watering programs.
Zone Run Times
Instructions for setting the duration each zone will water.
Days to Water Selection
Options for selecting watering days: specific days, interval, or odd/even.
Omit Times/Days/Dates
How to set blackout periods for watering to avoid certain times or days.
Seasonal % Adjust
Adjusts watering times monthly based on seasonal climate changes.
Manual Start Functions
Manual Zone Watering
How to manually water a single zone for a specific duration.
Manual Test Run
Performs a test run for all assigned zones to check run times.
System Diagnostics and Eco Features
Multimeter Outputs
Using the multimeter function to check electrical outputs like voltage and amperage.
Battery Status Check
Checking the controller's battery voltage level for PL1600 & PL4800 models.
Valve Locator
Feature to locate buried valves by cycling power to solenoids.
Sensor Operation
How to omit specific zones from sensor shutdown or configure RFS sensor settings.
Run and Soak Cycles
Setting variable run and pause times to prevent runoff and improve saturation.
Advanced Menu
Fault Identification
Identifies system problems requiring attention or repair.
Open Circuit Fault Alert
User-selectable alert for zones detecting no electrical load.
Language Settings
Changing the controller's menu language.
Unit Settings
Option to select between STANDARD or METRIC units.
Default Program Storage
Allows storing and retrieving a programmed setup.
Grow-In Program Setup
Sets up a temporary watering program that expires after a set number of days.
About Controller Information
Provides information on software version, model, build, and serial number.
Controller Information Details
Displays detailed controller information such as version, build, serial number, and module versions.
MODBUS Integration
Setting up a static address for third-party software integration.
Clear All Settings
Resets all user programs and most advanced menu changes to factory defaults.
Clear Program
Clears all programmed values for a specific watering program.
Concurrent Program Operation
Selects the number of programs that can run simultaneously.
Master Valve Configuration
Selects normally open or normally closed configuration for master valves.
Master Valve Zone Assignment
Assigns master valves (MV1, MV2, BOTH, OFF) to specific zones.
Master Valve/Zone Delays
Sets delays between master valve and zone valve operations.
Number of Start Times
Selects the number of watering start times visible on the dial.
Daylight Saving Time (DST)
Automatically adjusts the controller's time for Daylight Saving Time.
Run/Soak Cycle Configuration
Configures run and soak times for watering cycles to prevent runoff.
Sensor Override
Toggles the sensor override for rain/freeze functions on selected zones.
Flow Monitoring and Settings
Manages flow parameters, including high/low limits and leak detection.
SLW Weather Sensor Options
Configures rain, freeze, and delay settings for the SLW weather sensor.
Rain Delay Function
Globally suspends watering operations for a selected number of days.
Skip Circuit Threshold
Adjusts the skip circuit threshold for accessories like pump start relays.
Review Watering Functions
Accesses review functions for SLW communication, total run times, and clearing totals.
Troubleshooting
Total Reset Procedure
Step-by-step guide to perform a total reset on the controller.
Watering Cycle Pause Reasons
Explains the reasons for watering pauses indicated by controller display messages.
Troubleshooting Guide
A guide to diagnose and solve common problems with the controller.
Need help?
Do you have a question about the ProLine 1600 Series and is the answer not in the manual?
Questions and answers