Volume Bar; Rs232 - AMX CP-3017-TR-US Instruction Manual

Device Configuration Software
Buttons Options
Action
Color
RGB Color Settings Use the sliders to set a custom color for the button feedback.
Brightness Level
Perform the following steps to set button feedback:
1.
In the AMX DCS window, click the plus sign (+) beside Feedback in the Content area. A list of feedback options
appear.
2.
Click Buttons. The Buttons options appear (FIG. 53).
3. Select the button number from the Button Feedback options menu.
4.
Use the Action options menu to indicate whether you want to turn on button feedback. Selecting Off turns off
button feedback.
5.
Select a color from the Color options menu, or use the RGB Color Settings sliders to indicate a different color
from those listed.
6.
In the Scripting area, click Add. The Feedback event now appears in the script.

Volume Bar

The Volume Bar area enables you to set the brightness level for the volume indicator on the ControlPad.
FIG. 54 Volume Bar options
The following table lists the Volume Bar options:
Volume Bar Options
Action
Brightness Level Use the slider to set the brightness level of the button between 1 and 255. You can also use your

RS232

The RS232 option configures an RS232 device for the keypad. RS232 devices connect to the RS232 serial ports on the
rear of the keypad. You must use the Device Library Manager to add or import RS232 devices that you can program
through DCS. Once the device you want to program is in the device library, you can load the device in the RS232 section
and program events for it. See the Device Library Manager section on page 54 for more information.
42
Enables you to indicate whether you want to activate button feedback. You can choose from On,
Backlight, Flash, Full Off, On / All Buttons Off, On / Group Off, On / All Buttons Backlight, and On /
Group Backlight. Selecting Full Off turns off button feedback and reduces LED power to zero.
Selecting Group Off or Group Backlight sets the event for all buttons assigned to a button group.
See the Button Groups section on page 37 for more information.
Enables you to indicate the color of the button feedback for the specified action.
Use the slider to set the brightness level of the button between 1 and 255. You can also use your
pointer to select the text in the field beside the slider and manually enter the brightness level for the
button.
Note: You cannot turn off the brightness level by setting the level to 0.
Enables you to select the volume LED action type. You can choose from On, Flash, or Power Off.
pointer to select the text in the field beside the slider and manually enter the brightness level for the
button.
Note: You cannot turn off the brightness level by setting the level to 0.
Novara 3000 Series ControlPads Instruction Manual