Delay; Lockout Buttons - AMX CP-3017-TR-US Instruction Manual

Device Configuration Software

Delay

The Delay option enables you to insert a period of inaction into a script. Delays can range from 1 second up to 9 minutes
and 59 seconds. The delay is absolute and no other Event or Button press is acknowledged until the time period has
elapsed.
FIG. 60 Delay options
The following table lists the Delay options:
Delay Options
Minutes
Seconds
Time Delay This area displays the amount of time for the delay in minutes and seconds and reflects the movement of
Perform these steps to set a delay in a script:
1. In the AMX DCS window, click Delay. The Delay options appear (FIG. 60).
2.
Use the Minutes and Seconds sliders to set the amount of time for the delay.
3.
In the Scripting area, click Add. The delay now appears in the script.

Lockout Buttons

The Lockout Buttons option enables you to set a passcode for activating the keypad. With a lockout activated, a user
must enter a series of button presses before using the keypad. The passcode can be a sequential order of button presses or
a collection of button to be pressed simultaneously. You can program up to four buttons in one combination.
An unlock sequence requires that all buttons used in the sequence have scripts
defined for them. If an unlock sequence includes buttons which have no script
defined for them, you can only unlock the ControlPad with physical button presses,
and not through RMS or the web pages. RMS and the web pages allow only the entry
of defined/scripted buttons.
FIG. 61 Lockout Buttons options
The following table lists the Lockout Buttons options:
Lockout Buttons Options
Unlock
Method
Button
Add
46
Use the slider to indicate the number of minutes in the delay. You can set up to 9 minutes.
Use the slider to indicate the number of seconds in the delay. You can set up to 59 seconds.
each of the sliders.
Choose the method you want to use to unlock the keypad. You can choose from Sequence or Multi-Press.
Sequence indicates you must use a series of key presses in a particular order to unlock the keypad. Multi-
Press indicates the designated buttons are to be pressed simultaneously.
Select a button you want to include in the button combination.
Click to add the selected button to the button combination. If you try to add a button that is already in a
multi-press combination, you will receive an error message. This option appears greyed-out once you
have added four buttons to a combination.
Novara 3000 Series ControlPads Instruction Manual